Dell Latitude 7400 2-in-1 - Solid State Drive; Removing the Solid State Drive

Next steps
1. Connect the battery cable
2. Install the base cover.
3. Install the SD memory card.
4. Follow the procedure in after working inside your computer.
Solid state drive
Removing the solid state drive
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the SD memory card.
3. Remove the base cover.
4. Disconnect the battery cable.
Steps
1. Peel off the metal foil [1] and the black tape [2] that partially covers the solid state drive (SSD) cover.
34
Removing and installing components