NOTE: XXX denotes the SATA drive number.
● Optical Drive (if available)
● SATA Hard Drive (if available)
● Diagnostics
NOTE: Choosing Diagnostics, will display the ePSA diagnostics screen.
The boot sequence screen also displays the option to access the System Setup screen.
System setup options
NOTE: Depending on the laptop and its installed devices, the items listed in this section may or may not appear.
General options
Table 9. General
Option Description
System Information
This section lists the primary hardware features of your
computer.
The options are:
● System Information
● Memory Configuration
● Processor Information
● Device Information
Battery Information Displays the battery status and the type of AC adapter
connected to the computer.
Boot Sequence
Allows you to change the order in which the computer
attempts to find an operating system.
The options are:
● Windows Boot Manager
● Boot List Option:
Allows you to change the boot list options.
Click one of the following options:
○ Legacy External Devices
○ UEFI—Default
Advanced Boot Options
Allows you to Enable Legacy Option ROMs.
The options are:
● Enable Legacy Option ROMs—Default
● Enable Attempt Legacy Boot
UEFI Boot Path Security
Allows you to control whether the system prompts the user to
enter the Admin password when booting to a UEFI boot path.
Click one of the following options:
● Always, Except Internal HDD—Default
● Always
● Never
Date/Time
Allows you to set the date and time. The change to the
system date and time takes effect immediately.
System setup 97
To Next Page
Loading...
