Dell Latitude 9440 2-in-1 - Page 36

Steps
1. Align and place the left speaker into the slot on the chassis.
2. Replace the two (M1.6x1.8) screws to secure the left speaker to the system.
3. Connect the left speaker cable to connector on the system board.
4. Adhere the tape to secure the left speaker cable to the chassis.
When installing the left and right speakers, secure the speaker cables in place with pieces of tape adhered to the palm rest.
Next steps
1. Install the battery.
2. Install the WWAN card if applicable.
3. Install the base cover.
4. Follow the procedure in After working inside your computer.
36
Removing and installing components