Table 12. System setup optionsāUpdate, Recovery menu (continued)
Update, Recovery
Allow BIOS Downgrade Enable or disable the flashing of the computer firmware to previous revision is
blocked.
By default, the option is enabled.
SupportAssist OS Recovery Enable or disable the boot flow for SupportAssist OS Recovery tool in the
event of certain computer errors.
By default, the option is enabled.
BISOConnect Enable or disable cloud Service OS recovery if the main operating system fails
to boot with the number of failures equal to or greater than the value specified
by the Auto OS Recovery Threshold setup option and local Service OS does not
boot or is not installed.
By default, the option is enabled.
Dell Auto OS Recovery Threshold Controls the automatic boot flow for SupportAssist System Resolution Console
and for Dell OS Recovery Tool.
By default, the threshold value is set to 2.
Table 13. System setup optionsāSystem Management menu
System Management
Service Tag Display the Service Tag of the computer.
Asset Tag Create a computer Asset Tag.
AC Behavior
Wake on AC Enable or disable the wake on AC option.
By default, the option is disabled.
Wake on LAN
Wake on LAN Enable or disable the computer to power on by special LAN signals when it
receives a wakeup signal from the WLAN.
By default, the Disabled option is selected.
Auto on Time Enable to set the computer to turn on automatically every day or on a
preselected date and time. This option can be configured only if the Auto On
Time is set to Everyday, Weekdays, or Selected Days.
By default, the option is disabled.
Intel AMT Capability
By default, the Restrict Preboot Access option is selected.
Diagnostics
OS Agent Requests
By default, the option is enabled.
Power-on-Self-Test Automatic
Recovery
By default, the option is enabled.
Table 14. System setup optionsāKeyboard menu
Keyboard
Fn Lock Options By default, the Fn lock option is enabled.
Lock Mode
By default, the Lock Mode Secondary option is enabled.
Keyboard Illumination Enables to change the keyboard illumination settings.
By default, the Dim option is enabled.
BIOS setup 65
To Next Page
Loading...
