System fan
Removing the system fan
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the microSD card.
3. Remove the SIM card tray.
4. Enter service mode.
5. Remove the Base cover.
About this task
The following images indicate the location of the system fan and provide a visual representation of the removal procedure.
Steps
1. Disconnect the I/O cable and unroute the antenna cable through the routing guide.
2. Disconnect the system fan cable from the connector and peel the adhesive tape securing the system fan cable.
3. Remove the two (M2x3) screws that secure the system fan.
4. Lift the system fan off the palmrest assembly.
Removing and Installing Components
27
To Next Page
Loading...
