Table 11. Manageability (continued)
Option Description
The options are:
● Disabled
● Enabled
● Restrict MEBx Access (enabled by default)
USB Provision
When enabled, Intel AMT can be provisioned using the local
provisioning file through a USB storage device.
The Enable USB Provision option is disabled by default.
MEBx Hotkey
This option specifies whether the MEBx Hotkey function
should be enabled when the system boots.
The Enable MEBx Hotkey option is disabled by default.
Virtualization support
Table 12. Virtualization Support
Option Description
Virtualization
This option specifies whether a Virtual Machine Monitor (VMM) can
utilize the additional hardware capabilities that are provided by the
Intel Virtualization technology.
The Enable Intel Virtualization Technology option is enabled by
default.
NOTE: Trusted Execution requires Virtualization Technology to be
enabled.
VT for Direct I/O
Enables or disables the Virtual Machine Monitor (VMM) from utilizing
the additional hardware capabilities that are provided by the Intel
Virtualization Technology for direct I/O.
NOTE: Trusted Execution requires VT for Direct I/O to be
enabled.
The Enable VT for Direct I/O option is enabled by default.
Trusted Execution
This option specifies whether a Measured Virtual Machine Monitor
(MVMM) can utilize the additional hardware capabilities that are
provided by Intel Trusted Execution Technology.
NOTE: The TPM has to be enabled and activated, and
Virtualization Technology and VT for Direct I/O must be enabled
to use this feature.
The Trusted Execution option is disabled by default.
Wireless options
Table 13. Wireless
Option Description
Wireless Device Enable
Allows you to enable or disable the internal wireless devices.
The options are:
● WWAN/GPS
● WLAN
System setup 67
To Next Page
Loading...
