3. Install the Fan.
4. Install the Display assembly.
5. Install the Battery.
6. Install the Speakers.
7. Install the Solid-state drive.
8. Install the Base cover.
9. Install the SIM card tray
10. Install the microSD card.
11. Follow the procedure in After working on your computer .
Palmrest assembly
Removing the palmrest assembly
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the microSD card.
3. Remove the SIM card tray.
4. Remove the Base cover.
5. Remove the Solid-state drive.
6. Remove the Speakers.
7. Remove the Battery.
8. Remove the Display assembly.
9. Remove the System Fan.
10. Remove the I/O board .
11. Remove the Power button.
12. Remove the System board.
13. Remove the Keyboard.
About this task
The following images indicate the location of the palmrest and provide a visual representation of the removal procedure.
Steps
After performing the preceding steps, you are left with the palmrest assembly.
Removing and Installing Components
55
To Next Page
Loading...
