6. Install the Base cover.
7. Install the SIM card tray
8. Install the microSD card.
9. Follow the procedure in After working on your computer .
Display assembly
Removing the display assembly
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the microSD card.
3. Remove the SIM card tray.
4. Remove the Base cover.
5. Remove the Battery.
About this task
The following images indicate the location of the display assembly and provide a visual representation of the removal procedure.
NOTE: The display assembly removal procedure is the same for both laptop and convertible chassis.
48 Removing and Installing Components
To Next Page
Loading...
