I/O daughter board power cable
Removing the I/O daughter board power cable
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the microSD card.
3. Remove the SIM card tray.
4. Enter service mode.
5. Remove the Base cover.
About this task
The following images indicate the location of the I/O daughter board power cable and provide a visual representation of the
removal procedure.
Steps
1. Disconnect the I/O daughter board power cable from the I/O board, and system board.
2. Unroute the I/O daughter board power cable from the routing channels adjacent to the system fan.
3. Remove the I/O daughter board power cable from the system.
Installing the I/O daughter board power cable
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the I/O daughter board power cable and provides a visual representation of the
installation procedure.
Removing and Installing Components
29
To Next Page
Loading...
