Installing the palmrest assembly
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the palmrest assembly and provides a visual representation of the installation
procedure.
Steps
Transfer the components onto the new palmrest assembly.
Next steps
1. Install the Keyboard.
2. Install the System board
3. Install the FPC.
4. Install the I/O board.
5. Install the System Fan.
6. Install the Display assembly.
7. Install the Battery.
8. Install the Speakers.
9. Install the Solid-state drive.
10. Install the Base cover.
11. Install the SIM card tray
12. Install the microSD card.
13. Follow the procedure in After working on your computer .
56
Removing and Installing Components
To Next Page
Loading...
