Dell Latitude E5530 - Installing the Right Base Panel; Removing the Thermal Module

3. Remove the screws that secure the right base panel in place.
4. Remove the right base panel from the computer.
Installing the Right Base Panel
1. Place the right base panel in its location at the bottom of the computer.
2. Install the screws that secure the right base panel to the bottom of the computer.
3. Install :
a) access panel
b) battery
4. Follow the procedures in After Working Inside Your Computer.
Removing the Thermal Module
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a) SD memory card
b) battery
c) access panel
d) right base panel
30