Removing the Right Support Frame
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a) SD memory card
b) battery
c) access panel
d) keyboard trim
e) optical drive
f) hard drive
g) right base panel
h) palmrest
i) display assembly
3. Remove the screws that secure the right support frame to the computer.
4. Lift the right support frame away from the computer.
Installing the Right Support Frame
1. Place the right support frame on the computer.
2. Tighten the screws to secure the right support frame to the computer.
3. Install:
a) display assembly
b) palmrest
c) right base panel
d) hard drive
e) optical drive
f) keyboard
g) keyboard trim
h) access panel
i) battery
j) SD memory card
4. Follow the procedures in After Working Inside Your Computer.
41
To Next Page
Loading...
