4. Install the screws at the bottom of the computer.
5. Install :
a) right base panel
b) optical drive
c) keyboard
d) keyboard trim
e) access panel
f) battery
g) SD memory card
6. Follow the procedures in After Working Inside Your Computer.
Removing the ExpressCard Reader Cage
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a) SD memory card
b) battery
c) access panel
d) keyboard trim
e) keyboard
f) optical drive
g) right base panel
h) palmrest
3. Remove the screws that secure the ExpressCard reader cage in place.
4. Remove the ExpressCard reader cage from the computer.
Installing the ExpressCard Reader Cage
1. Align the ExpressCard reader cage to its original position in the computer and snap it into place.
2. Install the screws that secure the ExpressCard reader cage.
3. Install:
a) palmrest
b) right base panel
c) optical drive
d) keyboard
e) keyboard trim
f) access panel
g) battery
h) SD memory card
4. Follow the procedures in After Working Inside Your Computer.
35
To Next Page
Loading...
