Removing the Network Connector
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a) SD memory card
b) battery
c) access panel
d) keyboard trim
e) keyboard
f) optical drive
g) hard drive
h) right base panel
i) palmrest
j) display assembly
k) right support frame
l) left support frame
m) modem card
3. Remove the network connector cables from the routing channels.
4. Remove the network connector jack.
Installing the Network Connector Jack
1. Install the network connector jack in the computer.
2. Thread the network connector cable in the routing channel.
55
To Next Page
Loading...
