¡ Memory Installed
¡ Memory Available
¡ Memory Speed
¡ Memory Channel Mode
¡ Memory Technology
¡ DIMM A Size
¡ DIMM B Size
l Processor Information
¡ Processor Type
¡ Core Count
¡ Processor ID
¡ Current Clock Speed
l Device Information
¡ Primary Hard Drive
¡ System eSATA Device
¡ Dock eSATA Device
¡ Video Controller
¡ Video BIOS Version
¡ Video Memory
¡ Panel Type
¡ Native Resolution
¡ Audio Controller
¡ Modem Controller
¡ Wi-Fi Device
¡ Cellular Device
¡ Bluetooth Device
Displays the status of the battery and the type of AC adapter connected to the computer.
Specifies the order in which the computer attempts to find an operating system.
l Cardbus NIC
l Diskette drive
l USB Storage Device
l Internal HDD
l CD/DVD/CD-RW Drive
l Built-in EFI shell
l Onboard NIC
Displays current date and time settings.
NOTE: System Configuration contains options and settings related to integrated system devices. Depending on your computer and installed devices, the
items listed in this section may or may not appear.
Default setting: All enabled.
Allows you to configure the integrated network controller. The options are: Disabled, Enabled, and Enabled w/PXE.
Allows you to enable or disable the parallel ports on the docking station. The options are: Disabled, AT, PS2, and ECP.
Allows you to avoid resource conflicts between devices by disabling or remapping the address of the port. The options are: Disabled,
COM1, COM2, COM3, and COM4.
Allows you to configure the operating mode of the internal SATA hard drive controller. The options are: Disabled, ATA, and AHCI
Allows you to enable or disable the following devices:
l Internal Modem
l Module Bay
l Express Card
l Hard Drive Free Fall Protection
l External USB Port
l Microphone
l eSATA Ports
l Media Card, PC Card and 1394
Allows you to charge external devices using the stored system battery power through the USB PowerShare port on the notebook,
even while the notebook is turned off.
Allows your system to automatically change the brightness of your system's LCD panel based on the amount of light in the
environment.
Allowsyoutosetthedisplaybrightnessdependinguponthepowersource(On Battery and On AC).
Allows you to set, change, or delete the administrator (admin) password. When set, the admin password enables several security
features including:
l Restricts changes to the settings in Setup
l Restricts the boot devices listed in the <F12> Boot Menu to those enabled in the "Boot Sequence" field
l Prohibits changes to the owner and asset tags
l Substitutes for the system and hard drive password
NOTE: You must set the admin password before you set the system or hard drive password.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
