24 Using Your Projector
5 Error LED Error LED is blinking amber, one of the fans has
failed. The projector will automatically shut
down.
6 Menu Press to activate the OSD. Use the directional
keys and the Menu button to navigate through
the OSD.
7 Down / Keystone
adjustment
Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to adjust image distortion caused by tilting
the projector (+/-40 degrees).
8 Left / Source Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to toggle through Analog RGB, Composite,
and HDMI sources when multiple sources are
connected to the projector.
9 Enter Press to confirm the selection item.
To Next Page
Loading...
