Dell M110 - Using the Remote Control; Remote Control Buttons and Functions

Using Your Projector 25
Using the Remote Control (Optional)
1 LED light LED indicator.
2 Source Press to switch between Analog RGB, Composite,
and HDMI source.
3 Auto adjust Press to synchronize the projector with the input
source. Auto adjust does not operate if the OSD
(On-Screen Display) is displayed.
4 Up Press to navigate through the On-Screen Display
(OSD) Menu items.
5 Left Press to navigate through the On-Screen Display
(OSD) Menu items.
6 Enter Press to confirm the selection.
7 Menu Press to activate the OSD.
8 Down Press to navigate through the On-Screen Display
(OSD) Menu items.
9 Mute Press to mute or un-mute the projector speaker.
11
12
13
15
17
14
19
16
18
20
1
2
3
5
7
4
9
6
8
10