EasyManua.ls Logo

Dell MTC2 - Scanner Problems

Dell MTC2
144 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Solving Problems 49
Scanner Problems
NOTE: Dell does not cover the scanner’s warranty. If you need technical assistance for your
scanner, call the scanner’s manufacturer. See the scanner documentation for the correct phone
number.
CHECK THE SCANNER DOCUMENTATION See the scanner
documentation for setup and troubleshooting information.
UNLOCK THE SCANNER Ensure that your scanner is unlocked if it has a
locking tab or button.
RESTART THE COMPUTER AND TRY THE SCANNER AGAIN
CHECK THE CABLE CONNECTIONS
If your scanner has a power cable, ensure that the power cable is firmly
connected to a working electrical outlet and that the scanner is turned on.
Ensure that the scanner cable is firmly connected to the computer and to the
scanner.
VERIFY THAT THE SCANNER IS RECOGNIZED BY MICROSOFT
®
W
INDOWS
®
1 Click the Start button and click Control Panel.
2 Click Printers and Other Hardware.
3 Click Scanners and Cameras.
If your scanner is listed, Windows recognizes the scanner.
REINSTALL THE SCANNER DRIVER See the scanner documentation for
instructions.

Table of Contents

Related product manuals