EasyManua.ls Logo

Dell MTC2 - Safety Instructions; General Safety

Dell MTC2
144 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CAUTION: Safety Instructions 9
CAUTION: Safety Instructions
Use the following safety guidelines to help ensure your own personal safety and to help protect your computer and
working environment from potential damage.
SAFETY: General
Do not attempt to service the computer yourself unless you are a trained service technician. Always follow
installation instructions closely.
To help prevent electric shock, plug the computer and device power cables
into properly grounded electrical outlets. These cables are equipped with
3-prong plugs to help ensure proper grounding. Do not use adapter plugs or
remove the grounding prong from a cable. If you must use an extension
cable, use a 3-wire cable with properly grounded plugs.
To help avoid the potential hazard of electric shock, do not use your
computer during an electrical storm.
To help avoid the potential hazard of electric shock, do not connect or disconnect any cables or perform
maintenance or reconfiguration of this product during an electrical storm.
If your computer includes a modem, the cable used with the modem should be manufactured with a minimum
wire size of 26 American wire gauge (AWG) and an FCC-compliant RJ-11 modular plug.
Before you clean your computer, disconnect the computer from the electrical outlet. Clean your computer with a
soft cloth dampened with water. Do not use liquid or aerosol cleaners, which may contain flammable substances.
To help avoid possible damage to the system board, wait 5 seconds after turning off the computer before
disconnecting a device from the computer.
To avoid shorting out your computer when disconnecting a network cable, first unplug the cable from the network
adapter on the back of your computer, and then from the network jack. When reconnecting a network cable to
your computer, first plug the cable into the network jack, and then into the network adapter.
To help protect your computer from sudden, transient increases and decreases in electrical power, use a surge
suppressor, line conditioner, or uninterruptible power supply (UPS).
Ensure that nothing rests on your computer’s cables and that the cables are not located where they can be stepped
on or tripped over.
Do not push any objects into the openings of your computer. Doing so can cause fire or electric shock by shorting
out interior components.
Keep your computer away from radiators and heat sources. Also, do not block cooling vents. Avoid placing loose
papers underneath your computer; do not place your computer in a closed-in wall unit or on a bed, sofa, or rug.

Table of Contents

Related product manuals