Need help?Do you have a question about the Dell N1500 Series and is the answer not in the manual?
General| Operating Temperature | 0°C to 45°C (32°F to 113°F) |
|---|---|
| Power Supply | Internal power supply (100-240V AC) |
| Stacking | No |
| Management | Web-based |
| Jumbo Frame Support | Yes |
| Storage Humidity | 5% to 95% non-condensing |
Details the physical dimensions for N1500 Series non-PoE and PoE models.
Identifies ports and LEDs on the N1500 Series front panel.
Describes the characteristics of the front-panel RJ-45 and SFP+ ports.
Details the console port for serial communication and CLI access.
Explains the function and use of the USB port for file transfer.
Instructions on how to use the reset button for hard resets.
Explains the LEDs and display for stack master and unit number.
Identifies power supplies and ventilation on the back panel.
Details internal power supplies and optional redundant power options.
Describes the cooling system for the N1500 Series switches.
Provides a summary of N1500 Series models and their specifications.
Requirements for selecting an installation location for the switch.
Instructions for unpacking the switch and verifying contents.
Steps to install the switch in a standard 19-inch rack.
Instructions for placing the switch on a flat surface without a rack.
Procedure for creating a switch stack using SFP+ ports.
Explanation of the standby unit's role in a switch stack.
Guide to connecting a serial terminal for initial configuration.
Instructions for connecting the switch to AC and optional DC power.
Describes the switch's power-on self-test (POST) and boot process.
Overview of initial configuration steps and assumptions.
Details the steps for initial configuration using the wizard or CLI.
Demonstrates an example of the Dell Easy Setup Wizard session.
Guidance on post-configuration actions and feature usage.
Provides required information for compliance with Mexican standards.
To Next Page
