Dell Networking S6000 - Accessing the USB-B Console Port

40 | Management Ports
www.dell.com | support.dell.com
Accessing the USB-B Console Port
The terminal settings are the same for the USB-B port and the console port:
• 9600 baud rate
• No parity
• 8 data bits
• 1 stop bit
• No flow control
When you connect the USB-B port, it becomes the primary connection and, when the system is
connected, it sends all messages to the USB-B port.
Figure 7-2. USB-B Console Port Connector
1 - USB-B port
2 - USB-A port
3 Keep the default terminal settings on the S6000 console as follows:
• 9600 baud rate
• No parity
• 8 data bits
• 1 stop bit
• No flow control
Step Task (continued)