The S6000 System | 9
2
The S6000 System
This chapter contains general features, capabilities, and physical configurations the S6000 supports.
Introduction
The S6000 is a fully featured switch/router one rack unit (RU) system that you can deploy as a spine, leaf,
or top of rack (ToR) device where you require 10Gb and/or 40Gb connections. It contains 32 ports of 40G
that you can use to create a configuration of 96 ports of 10G small form-factor pluggable plus (SFP+)
(using breakout cables) and eight ports of 40G quad small form-factor pluggable (QSFP). The S6000
power supply unit (PSU) side (
Figure 2-1
) contains the PSU and fan modules.
Figure 2-1. S6000 PSU-Side View
1 - PSU 0
2 - Fan Modules 0-2
3 - PSU 1
The S6000 input/output (I/O) side (
Figure 2-2
) includes:
• Thirty-two fixed QSFP+ ports
• One USB 2.0 port
• One USB-B serial console port
• One RS-232 serial console port
• One 10/100/1000BaseT (RJ-45) Ethernet management port
To Next Page
Loading...
