Installing the System Board Cover
1. Place the system board cover on the computer.
2. Tighten the screws to secure the system board cover to the computer.
3. Install:
a) back cover
b) VESA stand
c) stand cover
4. Follow the procedures in
After Working Inside Your Computer
.
Removing the Coin-Cell Battery
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove:
a) stand cover
b) VESA stand
c) back cover
d) system board cover
3. Press the release latch away from the battery to allow the battery to pop up from the socket and lift the coin-cell
battery out of the computer.
18
To Next Page
Loading...
