4. Slide the blue drive-cage handle toward unlock position and lift the hard drive cage from the
computer.
Installing the Drive Cage
1. Place the drive cage on the edge of the computer to allow access to the cable connectors on the
hard drive.
2. Connect the data and power cables to the back of the hard drive.
3. Flip over the drive cage and insert it into the chassis. The drive cage tabs are secured by the slots in
the chassis.
4. Slide the drive-cage handle toward the locked position.
5. Install the:
a) front bezel
b) optical drive
c) cover
16
To Next Page
Loading...
