Option Description
– UEFI
Advanced Boot Options Allows you to Enable Legacy Option
ROMs
• Enabled (Default)
Date/Time Allows you to set the date and time. The
changes to the system date and time
takes effect immediately.
Table 3. System Configuration
Option Description
Integrated NIC Allows you to configure the integrated network controller. The
options are:
• Disabled
• Enable UEFI Network Stack
• Enabled
• Enabled w/PXE (Default)
• Enabled w/Cloud Desktop
Serial Port Identifies and defines the serial port settings. You can set the
serial port to:
• Disabled(Default)
• COM1
• COM2
• COM3
• COM4
NOTE: The operating system may allocate resources even if
the setting is disabled.
SATA Operation Allows you to configure the internal SATA hard-drive
controller. The options are:
• Disabled
• ATA
• AHCI (Default)
Drives Allows you to enable or disable the various drives on-board:
• SATA-0
• SATA-1
• SATA-2
Default Setting: All drives are enabled.
SMART Reporting This field controls if the hard drive errors for the integrated
drives are reported during system startup. This technology is
37
To Next Page
Loading...
