What to do if auxiliary device failure on Dell OptiPlex 3080 Small Form Factor?
If your Dell Desktop experiences an auxiliary device failure, the touchpad or external mouse may be faulty. For an external mouse, check the cable connection. Enable the Pointing Device option in the System Setup program.
What to do if my Dell Desktop displays 'Drive Not Ready'?
Install a hard drive in the hard drive bay.
What to do if BIOS recovery image found but invalid on Dell Desktop?
If the BIOS Recovery image found is invalid on your Dell Desktop, flash the latest BIOS version. If the problem persists, replace the system board.
What should I do if my Dell Desktop shows 'Memory Odd/Even Logic Failure'?
A memory module may be faulty or improperly seated. Reinstall the memory module or, if necessary, replace it.
How to resolve 'Memory Double Word Logic Failure' on my Dell OptiPlex 3080 Small Form Factor?
A memory module may be faulty or improperly seated. Reinstall the memory module or, if necessary, replace it.
What to do if my Dell OptiPlex 3080 Small Form Factor displays 'Error Reading PCMCIA Card'?
Reinsert the card or try another card.
What should I do if my Dell OptiPlex 3080 Small Form Factor Desktop shows 'Memory Allocation Error'?
Shut down the computer, wait for 30 seconds, and then restart it. Run the program again. If the error message still appears, see the software documentation.
What to do if Disk C failed initialization on Dell OptiPlex 3080 Small Form Factor?
If your Dell Desktop shows 'DISK C: FAILED INITIALIZATION', run the hard drive tests in Dell Diagnostics.
How to fix CPU failure on Dell OptiPlex 3080 Small Form Factor?
If you encounter a CPU failure on your Dell Desktop, run the Intel CPU diagnostics tools. If the problem persists, replace the system board.
Why does my Dell OptiPlex 3080 Small Form Factor Desktop say time-of-day clock lost power?
If your Dell Desktop displays 'TIME-OF-DAY CLOCK LOST POWER', connect your computer to an electrical outlet to charge the battery. If the problem persists, try to restore the data by entering the System Setup program, then immediately exit the program.
Covers general safety, before working, ESD protection, and warnings.
Details components and usage of the ESD protection kit for safe handling.
Steps to follow after completing internal computer work, including reassembly.
Identifies and lists key computer hardware components shown in diagrams.
Details specifications of various graphics cards available in the system.
Overview of system management capabilities and Dell's management suite.
Lists essential tools, screws, and identifies major computer parts for service.
Procedures for removing side cover and front bezel for access.
Covers HDD, SSD, and optical drive replacement procedures.
Procedures for memory modules, processor, and heat sink replacement.
Procedures for system board and power supply replacement.
Covers WLAN card, expansion cards, and optional I/O modules.
Guides on accessing, navigating, and basic overview of BIOS.
Covers setup options, updates, passwords, and CMOS reset.
Guide for running diagnostics and understanding LED status.
Lists and explains diagnostic and system error messages.
Procedures for OS recovery, backup, and WiFi troubleshooting.
Information on how to contact Dell for assistance with sales or technical issues.
To Next Page
General