Memory module
Removing the memory module
Prerequisites
1. Follow the procedure in before working inside your device.
2. Remove the device from fixed stand/Pro 1 height-adjustable stand/Offset VESA mount/Pro 2 height-adjustable stand/Wall
mount.
3. Remove the cover.
About this task
The figure indicates the location of the memory module and provides a visual representation of the removal procedure.
Steps
1. Lift the absorber above the memory module.
2. Gently pry the retention clips away from the memory module until the memory module pops up.
3. Slide and remove the memory module from the memory-module slot on the system board.
100
Removing and installing components
To Next Page
Loading...
