Replacing the chassis
Prerequisites
1. Follow the procedure in before working inside your device.
2. Remove the device from fixed stand/Pro 1 height-adjustable stand/Offset VESA mount/Pro 2 height-adjustable stand/Wall
mount.
3. Remove the hard-drive assembly.
4. Remove the cover.
5. Remove the system fan.
6. Remove the WLAN card.
7. Remove the solid-state drive.
8. Remove the power button
9. Remove the memory module.
10. Remove the coin-cell battery.
11. Remove the system board.
About this task
After removing the above components, we are left with the chassis.
Removing and installing components 121
To Next Page
Loading...
