NOTE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an
unpainted metal surface at the same time as touching a connector on the back of the computer.
Pro 2 Height-adjustable stand-HAS
Installing the device on a Pro 2 height-adjustable stand
Steps
1. Align and insert the slots on the height-adjustable stand into the tab on the stand base.
2. Lift and tilt the stand base.
3. Tighten the captive screw to secure the stand to the base.
NOTE: For the large height adjustable stand, replacing the screw to the unlock icon screw hole in the stand base
ensures the rotation of the 30-inch - 32-inch monitor.
Stands 43
To Next Page
Loading...
