Hard-drive bracket
Removing the hard-drive bracket
Prerequisites
1. Follow the procedure in before working inside your device.
2. Remove the device from fixed stand/Pro 1 height-adjustable stand/Offset VESA mount/Pro 2 height-adjustable stand/Wall
mount.
3. Remove the hard-drive assembly.
About this task
Steps
Pull the rubber tab on the protective sleeve and lift the hard-drive module out from the hard-drive bracket.
Installing the hard-drive bracket
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
94
Removing and installing components
To Next Page
Loading...
