Dell OptiPlex 3090 Ultra - Page 97

Steps
1. Insert the hard drive into the protective sleeve.
NOTE: Ensure to match the mark on the protective sleeve with the hard drive PIN and connector location.
2. Pull the protective sleeves along the hard-drive edges.
3. Connect the hard-drive cable to the connector on the hard drive.
Next steps
1. Install the hard-drive bracket.
2. Install the hard-drive assembly.
3. Install the device on Fixed stand/Pro 1 height-adjustable stand/Offset VESA mount/Pro 2 height-adjustable stand/Wall
mount.
4. Follow the procedure in after working on your device.
Removing and installing components
97