What does 'Bad Command Or File Name' mean on my Dell OptiPlex 5090 Small Form Factor and how to fix it?
If your Dell Desktop displays 'Bad Command Or File Name', ensure that you have spelled the command correctly, put spaces in the proper place, and used the correct path name.
What does steady white light mean on Dell OptiPlex 5090 Small Form Factor Desktop and how to fix it?
If your Dell Desktop is not responding and shows a steady white light, ensure the display is connected and turned on. If it is, listen for a beep code.
What to do if my Dell Desktop displays 'Time-of-Day Not Set'?
If your Dell Desktop displays 'Time-of-Day Not Set', the time or date stored in the system setup program does not match the system clock. Correct the settings for the Date and Time options.
What to do if the time or date stored in the system setup program does not match the system clock on Dell Desktop?
Correct the settings for the Date and Time options on your Dell Desktop.
What does 'Bad Command or File Name' mean on Dell Desktop?
If your Dell Desktop displays 'Bad Command or File Name', ensure that you have spelled the command correctly, put spaces in the proper place, and used the correct path name.
What to do if BIOS recovery image is not found on Dell OptiPlex 5090 Small Form Factor?
If your Dell Desktop shows 'BIOS Recovery image not found', flash the latest BIOS version. If the problem persists, replace the system board.
What to do if the system configuration information does not match the hardware configuration on Dell Desktop?
Correct the appropriate options in the system setup program on your Dell Desktop.
How to resolve 'The File Being Copied Is Too Large' error on Dell OptiPlex 5090 Small Form Factor?
If your Dell Desktop displays the error 'The File Being Copied Is Too Large For The Destination Drive', the file you're trying to copy is too large to fit on the disk, or the disk is full. Try copying the file to a different disk or use a larger capacity disk.
How to fix 'Hard-Disk Drive Read Failure' on Dell OptiPlex 5090 Small Form Factor?
If your Dell Desktop displays 'Hard-Disk Drive Read Failure', the hard drive may be defective. Shut down the computer, remove the hard drive, and boot the computer from an optical drive. Then, shut down the computer, reinstall the hard drive, and restart the computer. If the problem persists, try another drive. Run the Hard Disk Drive tests in Dell Diagnostics.
What does 'General Failure' mean on my Dell OptiPlex 5090 Small Form Factor Desktop and how to fix it?
If your Dell Desktop displays 'General Failure', the operating system is unable to carry out the command. This message is usually followed by specific information, such as 'Printer out of paper'. Take the appropriate action based on the specific information provided.
To Next Page
General