K
Karl LaraSep 12, 2025
How to fix BIOS Recovery image not found on Dell Laptop?
- JJose Carroll PhDSep 12, 2025
Flash the latest BIOS version. If the problem persists, you may need to replace the system board.
 

How to fix BIOS Recovery image not found on Dell Laptop?
Flash the latest BIOS version. If the problem persists, you may need to replace the system board.
How to fix 'Memory Address Line Failure' on my Dell OptiPlex 5090 Small Form Factor?
A memory module may be faulty or improperly seated. Reinstall the memory module or, if necessary, replace it.
What does 'General Failure' mean on my Dell OptiPlex 5090 Small Form Factor Desktop and how to fix it?
If your Dell Desktop displays 'General Failure', the operating system is unable to carry out the command. This message is usually followed by specific information, such as 'Printer out of paper'. Take the appropriate action based on the specific information provided.
What to do if my Dell Laptop has invalid memory installed?
Try resetting the memory module. If the problem persists, consider replacing the memory module.
How to fix BIOS recovery image found but invalid on Dell OptiPlex 5090 Small Form Factor?
If your Dell Desktop shows 'BIOS Recovery image found but invalid', flash the latest BIOS version. If the problem persists, replace the system board.
What to do if no memory/RAM is detected in my Dell Water Filtration System?
If your Dell Water Filtration System isn't detecting memory/RAM, first ensure the memory module is properly installed. If the problem continues, you may need to replace the memory module.
What to do if my Dell Desktop displays 'Time-of-Day Clock Stopped'?
Connect your computer to an electrical outlet to charge the battery.
What does it mean if my Dell Desktop displays 'System fan failure'?
This message indicates that the system fan has failed.
What does it mean if my Dell OptiPlex 5090 Small Form Factor displays 'CPU fan failure'?
This message indicates that the CPU fan has failed.
Why does my Dell OptiPlex 5090 Small Form Factor Desktop say 'CMOS checksum error'?
This message indicates that the RTC is reset, and the BIOS Setup default has been loaded.











