Removing The Coin-Cell Battery
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove the
a) cover
b) expansion card
3. Carefully press the release latch away from the battery. The battery pops out from the socket, lift the coin-cell
battery out of the computer.
Installing The Coin-Cell Battery
1. Place the coin cell battery into its slot on the system board.
2. Press the coin cell battery downward until the release latch springs back into place and secures it.
3. Install the expansion card.
4. Install the cover.
5. Follow the procedures in
After Working Inside Your Computer
.
Removing The Hard Drive
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove the cover.
14
To Next Page
Loading...
