Installing the Converter Board
1. Place the convertor board into its place.
2. Tighten the screws that secure the converter board to the computer.
3. Connect the backlight and converter cables to the converter board.
4. Install the:
a) back cover
b) VESA stand
5. Follow the procedures in
After Working Inside Your Computer
.
Removing the System-Board Shield
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove the:
a) VESA stand
b) back cover
c) VESA mount bracket
3. Remove the screws that secure the system-board shield to the computer. Lift the system-board shield away from
the computer.
Installing the System-Board Shield
1. Align and place the system-board shield on the back of the computer.
2. Tighten the screws that secure the system-board shield to the computer.
3. Install the:
a) VESA mount bracket
b) back cover
c) VESA stand
4. Follow the procedures in
After Working Inside Your Computer
.
12
To Next Page
Loading...
