Installing the Power-Button Board
1. Align and place the power-button board on the computer.
2. Connect the power-button cable to the board.
3. Install:
a) back cover
b) VESA stand
4. Follow the procedures in
After Working Inside Your Computer
.
Removing the Processor Fan
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove the:
a) VESA stand
b) back cover
c) VESA mount bracket
d) system-board shield
3. Disconnect the processor-fan cable from the connector on the system board. Remove the screws that secure the
processor fan to the system board and lift it away from the computer.
26
To Next Page
Loading...
