Dell OptiPlex 9030 - Installing the Speakers

4. Remove the screws that secure the speakers to the chassis. Lift the speakers from the computer.
Installing the Speakers
1. Place and align the speakers on the chassis. Tighten the screws that secure the speaker to the
chassis.
2. Thread the cables on the notches. Connect the speaker cables to the system board.
3. Install:
a. system-board shield
b. I/O board shield
c. VESA mount bracket
d. back cover
e. bottom cover
f. VESA stand
4. Follow the procedures in After Working Inside Your Computer.
33