Dell OptiPlex Tower 7010 - Power Ratings; Power Supply Connector; Integrated Graphics Processing Unit (GPU)

Power ratings
The following table lists the power rating specifications of OptiPlex Tower 7010.
Table 14. Power ratings
Description Option one Option two
Type
180 W internal power supply unit (PSU),
85% Efficient, 80 Plus Bronze
300 W internal power supply unit (PSU),
92% Efficient, 80 Plus Platinum
Input voltage
90 VAC–264 VAC 90 VAC–264 VAC
Input frequency
47 Hz-63 Hz 47 Hz-63 Hz
Input current (maximum)
3.0 A 4.2 A
Output current (continuous)
● 12 VA/15 A
● 12 VB/14 A
Standby mode:
● 12 VA/1.5 A
● 12 VB/3.3 A
● 12 VA/18 A
● 12 VB/18 A
Standby mode:
● 12 VA/1.5 A
● 12 VB/3.3 A
Rated output voltage
● +12 VA
● +12 VB
● +12 VA
● +12 VB
Temperature range:
Operating
5°C-45°C (41°F-113°F) 5°C-45°C (41°F-113°F)
Storage
-40°C-70°C (-40°F-158°F) -40°C-70°C (-40°F-158°F)
Power supply connector
The following table lists the Power supply connector specifications of your OptiPlex Tower 7010.
Table 15. Power supply connector
180 W (80 PLUS Bronze)
● Two 4 pin connectors for processor
● One 8 pin connector for system board
300 W (80 PLUS Platinum)
● Two 4 pin connectors for processor
● One 8 pin connector for system board
GPU—Integrated
The following table lists the specifications of the integrated Graphics Processing Unit (GPU) supported by your OptiPlex Tower
7010.
Table 16. GPU—Integrated
Controller External display support Memory size Processor
Intel UHD Graphics 710
● One DisplayPort 1.4a port
(HBR2)
● One HDMI 1.4b port
(1920x1200@60Hz max.
resolution)
Shared system memory Intel Pentium G7400/ Intel
Celeron G6900 processors
24 Specifications of OptiPlex Tower 7010