Dell OptiPlex Tower 7010 - Regulatory Compliance; Operating and Storage Environment

Regulatory compliance
The following table lists the regulatory compliance of your OptiPlex Tower 7010.
Table 21. Regulatory compliance
Regulatory compliance
Product Safety, EMC and Environmental Datasheets
Dell Regulatory Compliance Home page
Dell and the Environment
Operating and storage environment
This table lists the operating and storage specifications of your OptiPlex Tower 7010.
Airborne contaminant level: G1 as defined by ISA-S71.04-1985
Table 22. Computer environment
Description Operating Storage
Temperature range
10°C-35°C (50°F-95°F) -40°C-70°C (-40°F-158°F)
Relative humidity (maximum)
20% to 80% (non-condensing) (non-
condensing, Max dew point temperature
= 26°C)
0% to 95% (non-condensing) 5% to
95% (non-condensing, Max dew point
temperature = 33°C)
Vibration (maximum)
*
0.26 GRMS random at 5 Hz-350 Hz 1.37 GRMS random at 5 Hz-350 Hz
Shock (maximum)
Bottom/Right half-sine pulse 40G, 2 ms 105G, 2 ms half-sine pulse
Altitude range
-15.2 m to 3048 m (-49.8 ft to 10,000 ft) -15.2 m to 10,668 m (-49.8 ft to 35,000
ft)
CAUTION: Operating and storage temperature ranges may differ among components, so operating or storing
the device outside these ranges may impact the performance of specific components.
* Measured using a random vibration spectrum that simulates user environment.
† Measured using a 2 ms half-sine pulse.
Specifications of OptiPlex Tower 7010
27