Dell OptiPlex Tower 7010 - 2.5-inch Hard Drive Removal and Installation

Steps
1. Position the front bezel to align the tabs on the bezel with the slots on the chassis.
2. Press the bezel until the tabs clicks into place.
Next steps
1. Install the side cover.
2. Follow the procedure in after working inside your computer.
Hard drive
2.5-inch hard drive
Removing the 2.5-inch hard drive assembly
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the side cover.
Removing and installing Customer Replaceable Units (CRUs)
41