What to do if my Dell P171G Laptop has BIOS recovery image not found?
If the BIOS recovery image is not found on your Dell Laptop, flash the latest BIOS version. If the problem persists, replace the system board.
What to do if my Dell Laptop has display failure with SBIOS message?
If your Dell Laptop's display fails and shows an SBIOS message, replace the display-assembly cable (EDP) if possible. Otherwise, replace the display assembly (LCD).
What to do if short in hinge cable tripped OCP2 in Dell P171G Laptop?
If a short in the hinge cable has tripped OCP2 in your Dell Laptop, check if the display-assembly cable (EDP) is properly seated or pinched at the hinges. If the problem continues, replace either the display-assembly cable (EDP) or the display assembly (LCD).
What to do if short in hinge cable tripped OCP1 in Dell P171G?
If a short in the hinge cable has tripped OCP1 in your Dell Laptop, check if the display-assembly cable (EDP) is properly seated or pinched at the hinges. If the problem continues, replace either the display-assembly cable (EDP) or the display assembly (LCD).
What to do if my Dell Laptop has CMOS battery failure?
If your Dell Laptop experiences a CMOS battery failure, try resetting the CMOS battery connection. If the problem continues, replace the coin-cell battery.
What to do if my Dell P171G has invalid memory module installed?
If your Dell Laptop indicates an invalid memory module is installed, first, confirm that the memory module is installed correctly. If the problem persists, replace the memory module.
What to do if my Dell P171G Laptop battery is swollen?
If you notice that the battery in your Dell Laptop is swollen, immediately discontinue using the laptop. Discharge the battery by disconnecting the AC adapter and allowing it to drain completely. Also, you should contact Dell product support to explore options for replacing the swollen battery under your warranty or service contract.
What to do if my Dell Laptop has memory or RAM failure?
If your Dell Laptop experiences a memory or RAM failure, ensure the memory module is properly installed. If the issue persists, try replacing the memory module.
Provides essential safety guidelines for working with the computer.
Outlines preparatory steps before disassembling the computer.
Lists general safety precautions for disassembly and reassembly.
Explains the importance of ESD protection and how to achieve it.
Details the components and usage of an ESD field service kit.
Lists the steps to follow after completing internal computer work.
Instructions for removing and installing the laptop's base cover.
Procedures for removing and installing M.2 solid-state drives.
Steps for removing and installing the wireless card.
Instructions for removing and installing the computer's fan.
Discusses precautions and procedures for handling the laptop battery.
Details the process for removing and installing the heat sink.
Instructions for removing and installing the entire display assembly.
Details the process for removing and installing the system board.
Procedures for removing and installing the palm-rest and keyboard assembly.
Instructions on how to access the BIOS setup utility.
Details the various configuration options available in BIOS setup.
Provides steps for updating the system's BIOS.
Guidance on safely handling swollen lithium-ion batteries.
Details how to run hardware diagnostics before the OS loads.
Explains the system board's built-in self-test (M-BIST).
How to run the LCD Built-in Self Test to diagnose screen issues.
Information on using Dell SupportAssist OS Recovery.
To Next Page
General
