Operating your monitor │ 51
OSD warning messages
When the monitor does not support a particular resolution mode, the following
message is displayed:
1920x1080,
This means that the monitor cannot synchronize with the signal that it is receiving
from the computer. See Monitor specifications for the Horizontal and Vertical
frequency ranges addressable by this monitor. The recommended mode is 1920 x
1080.
You will see the following message before the DDC/CI function is disabled:
The function of adjusting display setting using PC application will be
Yes
No
disabled.
Do you wish to disable DDC/CI function?
You will see the following message before the Lock function is activated:
Are you sure you want to lock the Menu Buttons?
Yes
To unlock the Buttons, refer to the User’s Guide.
No
To Next Page
Loading...
