Operating the Monitor │ 45
Personalize User can select from “Preset Modes”, “Brightness/
Contrast”,“ Input Source”, “Aspect Ratio” ,“Volume”,
“Video Swap” and “PIP/PBP Mode” set as shortcut key.
Power
Button LED
Allows you to set the power LED indicator on or off during
active to save energy.
USB Allows you to enable or disable USB function during
monitor standby mode.
NOTE: USB ON/OFF under standby mode is only available
when USB upstream cable is unplugged. This option will be
greyed out when USB upstream cable is plugged in.
To Next Page
Loading...
