Replacing the power button
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Procedure
• Post-requisites
Procedure
1. Using the alignment posts, align and place the power button on the palm-rest and keyboard assembly.
2. Replace the screws (M2x3) that secure the power button to the palm-rest and keyboard assembly.
Post-requisites
1. Replace the I/O board.
2. Replace the wireless card.
3. Replace the solid-state drive.
4. Replace the base cover
30
Replacing the power button 49
To Next Page
Loading...
