Dell P92G - Replacing the Memory Modules; Procedure; Post-Requisites

Replacing the memory modules
WARNING
: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your computer. After working inside your computer, follow the instructions in After working inside
y
our computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/
r
egulatory_compliance.
Procedure
1 Align the notch on the memory module with the tab on the memory-module slot.
NOTE: The number of memory modules may vary with the conguration that you ordered.
2 Slide the memory module rmly into the slot at an angle and press the memory module down until it clicks into place.
NOTE: If you do not hear the click, remove the memory module and reinstall it.
Post-requisites
Replace the base cover.
11
Replacing the memory modules 23