Replacing the base cover
WARNING
: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your computer. After working inside your computer, follow the instructions in After working inside
y
our computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/
r
egulatory_compliance.
Procedure
NOTE
: Steps 1 and 2 are applicable only if you have disconnected the battery prior to removing other components from your
computer.
1 Connect the battery cable to the system board.
2 Adhere the tape that secures the battery cable connection to the system board.
3 Adhere the tape that secures the battery cable to the system board.
4 Align the base cover with the palm-rest and keyboard assembly.
5 Snap the base cover into place.
7
16 Replacing the base cover
To Next Page
Loading...
