Dell P92G - Replacing the Speakers; Procedure; Post-Requisites

Replacing the speakers
WARNING
: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your computer. After working inside your computer, follow the instructions in After working inside
y
our computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/
r
egulatory_compliance.
Procedure
1 Using the alignment posts, align and place the speakers on the palm-rest and keyboard assembly.
2 Route the speaker cable through the routing guides on the palm-rest and keyboard assembly.
3 Adhere the tape to the touchpad bracket.
4 Connect the speaker cable to the system board.
Post-requisites
1 Replace the battery
.
2 Replace the base cover
.
27
Replacing the speakers 47