Dell PERC S130 - Cannot Initialize a Physical Disk; Cannot Create a Virtual Disk on Selected Physical Disks; Cannot Perform an Online Capacity Expansion; Reconfigure on a Virtual Disk; Status LED Is Not Working

Cannot initialize a physical disk
Check whether or not the physical disk is:
1. Already a member of a virtual disk.
2. Currently a global or dedicated hot spare.
3. Reporting an Oine state.
Only physical disks that are Ready state can be initialized.
Cannot create a virtual disk on selected physical disks
Check whether these physical/virtual disks were migrated from a legacy controller with mixed RAID levels. If so, creating additional
virtual disk(s) on these physical disk(s) is not allowed.
Cannot perform an Online Capacity Expansion / Recongure on a virtual disk
Check whether these physical/virtual disks were migrated from a legacy controller with mixed RAID levels. If so, Online Capacity
Expansion / Recongure by adding physical disk on such a set of physical disks is not allowed.
Status LED is not working
Ensure system is booted to the operating system. Install Dell Open Manage Server Administrator management utility version 7.0 (or
higher).
46