Dell PERC S130 - Overview; PERC S130 Specifications

1
Overview
The Dell PowerEdge RAID Controller (PERC) S130 is an economical RAID solution for the Dell PowerEdge systems. The S130
controller supports up to ten SATA HDDs or SATA SSDs depending on your system backplane conguration.
PERC S130 specications
The following table provides PERC S130 specications:
Table 1. Specications for PERC S130
Specication PERC S130
SATA SSD technology Yes
I/O controller Intel X99 chipset
Intel C236 chipset
NOTE: The Intel C236 chipset is supported only on
PowerEdge R330, R230, T330, and T130 systems.
Communication with the system Integrated
Communication with the end devices SATA links
SAS connectors No
SATA connectors Discrete on the system board
Dell-compliant SATA compatibility Yes
Dell-compliant SAS compatibility No
Direct-connected end devices Dell-compliant HDDs and SSDs
SMART error support through management applications Yes
Backplane supported systems Yes
Software-based RAID Volume, RAID 1, RAID 0, RAID 5, RAID 10
Support for internal tape drive Yes
Support for global hot spare Yes
Support for 512 native and 512e drives Yes
Support for 4Kn native drives Yes
Maximum number of global hot spares Varies with the number of free disks in the system.
Pass through SSD support Yes
The following table provides PERC S130 virtual disk specications:
6