Dell PowerConnect 5224 - Page 12

------------------- DONE --------------------
Console#
Health
The Health page contains the following information:
l Internal Power Status
l Redundant Power Status
The power status is indicated by the following icons:
l Green check — Power is connected and operating.
l Red cross — Power is connected but has failed.
l Not present — Power is not connected.
To reset these fields to their current value, click Refresh.
CLI Commands
The following table summarizes the equivalent CLI command for items in the Switch/General/Health page.
Example
Console#show version
Unit1
Serialnumber:123457
Servicetag:3
Hardwareversion:/2002
Numberofports:24
Masterpowerstatus:up
Backuppowerstatus:up
Agent(master)
Unitid:1
Loaderversion:0.0.5.5
Bootromversion:0.0.6.0
Operationcodeversion:0.2.0.0
Console#
Versions
The Versions page contains the following fields:
Command
Usage
show
version
Displays hardware and software version information for the system, as well as the unit's
power status